Best Snowboard Wall Mount • Reviews & Buying Guide
Outlinist's team and our families are supported thanks to affiliate commissions that we may earn when you buy through links on our site. Read more

Best Snowboard Wall Mount • Reviews & Buying Guide (November 2024)

Updated: November 11, 2024

Grassracks Bamboo Snowboard Wall Mount

After 51 hours spent researching the best snowboard wall mounts, we think Grassracks Bamboo Snowboard Wall Mount is the best for most people.

This choice is based on several criteria: capacity, weight limit, material, finish, height, arm length, arm padding, arm angle, arm type, construction, wall-mounting, easy installation, accessory hook, weight, and warranty, among other things.

 ProductPriceOverall RatingQualityDurabilityAppearanceMaintenanceValue for Moneycapacityweight limitmaterialfinishheightarm lengtharm paddingarm anglearm typeconstructionwall-mountingeasy installationaccessory hookweightwarranty
Grassracks Bamboo Snowboard Wall MountGrassracks Bamboo Snowboard Wall MountCheck Price4.85.04.55.04.55.03 boards75 lbsBambooGolden26.25 in7 inNo paddingAngledFlatOne-pieceScrewsYesYes5 lbs30 days
Pro Board Racks Hanging Snowboard Wall MountPro Board Racks Hanging Snowboard Wall MountCheck Price4.55.04.54.54.04.55 boards120 lbsBaltic birchPlywood46 in9 inNo paddingAngledFlatOne-pieceScrewsYesYes10 lbs30 days
Pro Board Racks Padded Snowboard Wall MountPro Board Racks Padded Snowboard Wall MountCheck Price4.34.54.04.04.54.54 boards100 lbsPinePine36 in11 in3/4-in foamAngledRoundAssembledScrewsYesNo5 lbs30 days
T-Rax Aluminum Snowboard Wall MountT-Rax Aluminum Snowboard Wall MountCheck Price4.95.05.05.04.55.06 boards120 lbsAlluminumMetalic black40 inNot specifiedUV-rated foamHorizontalRoundWeldedScrewsYesNo14 lbs30 days
Store Your Board Timber Snowboard Wall MountStore Your Board Timber Snowboard Wall MountCheck Price4.45.04.54.04.04.53 boards60 lbsOakCherry30 in14.5 inCorkAngledFlatAssembledScrewsYesNo6.8 lbs30 days
Best Snowboard Wall Mount

Owning the best snowboard wall mount is both practical and personal. These twin viewpoints determine the model you’ll select.

You need a secure place to store snowboards between runs. But you’ll also enjoy displaying, showing off a little, and anticipating upcoming adventures.

Naturally you want to keep a snowboard in excellent condition both during and after the winter sports season. A snowboard bag is great for protection when traveling to and from the slopes, but it’s not the place to leave a board between trips when it might be damp or wet.

Common sense dictates cleaning and thoroughly drying winter sports items after use. You wouldn’t leave wet all-mountain skis or your favorite backcountry skis enclosed in a ski bag. You’re not likely to leave saturated ski socks jammed inside a pair of winter boots or wet ski boots inside a ski boots bag.

Forgetting damp ski gloves in the pockets of a ski jacket, or leaving a soggy ski mask stuffed into a ski backpack causes mishaps too, with resulting mildew. Similarly, a snowboard with snowboard bindings should be allowed to dry thoroughly.

That’s where an indoor snowboard rack makes a lot of sense – and this storage isn’t just for snowboards. These racks can double as a skateboard wall mount, a longboard storage rack, a safe place for snowshoes, or even possibly a surfboard if it’s the right size.

Given the substantial investment you’ve made in a snowboard and snowboard boots, adding a snowboard wall rack is a wise recommendation.

Selection Of The Best Snowboard Wall Mounts

Here are the best snowboard wall mounts for most people according to Outlinist:

Grassracks Bamboo Snowboard Wall Mount

Grassracks Bamboo Snowboard Wall Mount
(rated 4.8 / 5)
Quality
Durability
Appearance
Maintenance
Value for Money
Check Price

When it comes to snowboard storage and being green at the same time, what does a snowboarder who cares about the planet do?

The answer is a wooden ski rack which is made of something that is sustainable and good looking.

Naturally you want to be looking after a new snowboard and throwing it into a cupboard at the end of the season is not what anyone really has in mind.

Your snowboard is carefully crafted technology which obviously you want to make sure is not going to get scratched or dinged when you’re not using it.

The answer to safe snowboard storage is a snowboard wall mount.

Information

It has angled arms which transfer some of the weight to the back and the wall, theoretically making the rack better able to hold the weight and saves on space.

Tree huggers are going to love this product because the Grassracks Bamboo Snowboard Wall Mount is a wood snowboard rack made from bamboo. Bamboo has three wonderful qualities; it is lightweight, it is strong and it is sustainable. That’s all good for bamboo, but how does it work as a skateboard wall mount?

The answer is it works very well indeed. The Grassracks is a 3 board rack, suited to an enthusiast who needs a reason to stop buying more snowboards. (If you can’t store it you can’t have another one, right?)

It has angled arms which transfer some of the weight to the back and the wall, theoretically making the rack better able to hold the weight and saves on space. Although the arms are not padded, the bamboo has a smooth finish to prevent scratches.

capacity3 boards
weight limit75 lbs
materialBamboo
finishGolden
height26.25 in
arm length7 in
arm paddingNo padding
arm angleAngled
arm typeFlat
constructionOne-piece
wall-mountingScrews
easy installationYes
accessory hookYes
weight5 lbs
warranty30 days

This rack weighs only 5 pounds but is capable of supporting 75 pounds, so each board and binding can weigh in at 25 pounds each. This is going to carry more than you need and then some. But you might not want to put all that capacity to the boards, because this rack has accessory hooks, too.

To protect the wall, Grassracks added padding to the back of the frame. This is a thoughtful touch that most other manufacturers do not include.

It is a single piece construction which only means you need some way of holding it when you’re installing it. Additionally, the distance between the two verticals is set at a controlled distance. That said, the rack will hold snowboards, long boards and skateboards without any problem.

Pros

Rather than sticking out at a straight 90 degree angle, the support arms are tilted up making it a more space-saving design.

There is not a product on earth which does not have its lovers and its haters. What works for one person someone else might hate. The things which make the difference are the features. Here are some of the outstanding features of this Grassracks snowboard wall mount.

  • The 5 lbs. to 75.lbs. ratio is plenty of strength and storage: Boards, gloves, helmet and anything else you need, other than your clothes, is going to be just fine hanging on this cute rack. You will never spend time looking for stuff again because it is all in one place.
  • The install mechanism is really well thought out and executed: All you need to do is install one horizontal bar and then you hang the rack with its cradles to rest the board onto it. The horizontal bar at the top has to be installed and properly supported as most of the weight is pivoting directly from that point.
  • Upward angled arms save space and are good for display: Rather than sticking out at a straight 90 degree angle, the support arms are tilted up making it a more space-saving design. The upward angle is also better to show off the cool finishes on the boards.
  • 7 inch arm is large enough for most boards: On average boards are between 8 to 10 inches wide, so the arm is long enough to support them properly with the angled arms transferring the weight downwards.
  • Includes accessory hooks: Anything that helps keep all your gear together is quite a good idea, and these hooks are very handy. You want to spend time on the board not looking for your helmet or your gloves.
  • Attention to details means nice finishing touches: It is a small thing, but included in the package are small pads which you attach to the back of the arms unit where it hits the wall. It protects the wall where at least half the weight hits it.

Cons

Is there anything that can go wrong with a snowboard rack? So long as it does the job what could go wrong? It comes down to personal choice a lot of the time, but here are a few items to consider before making a final decision on this Grassracks snowboard wall mount.

  • No padding on the arms: The finishing is so well done this might not matter, but there’s a slight chance it could scratch the board. Check out the finish before using and make sure there are no rough edges.
  • Board space is rather tight: A full height of 26.5 inches means that the space between the arms ends up being around 4.75 inches which makes it snug for a board and its bindings. You might prefer to remove the bindings when you’re storing the board – at least for the summer.
  • The width is a finite distance: Because it is a single piece construction the gap between the two verticals is set and cannot be adjusted. It’s not really a limitation but water skis or a long board may hang over the side dramatically.
 

Grassracks Bamboo Snowboard Wall MountGrassracks Bamboo Snowboard Wall Mount

Pro Board Racks Hanging Snowboard Wall MountPro Board Racks Hanging Snowboard Wall Mount

Pro Board Racks Padded Snowboard Wall MountPro Board Racks Padded Snowboard Wall Mount

PriceCheck PriceCheck PriceCheck Price
capacity3 boards5 boards4 boards
weight limit75 lbs120 lbs100 lbs
materialBambooBaltic birchPine
finishGoldenPlywoodPine
height26.25 in46 in36 in
arm length7 in9 in11 in
arm paddingNo paddingNo padding3/4-in foam
arm angleAngledAngledAngled
arm typeFlatFlatRound
constructionOne-pieceOne-pieceAssembled
wall-mountingScrewsScrewsScrews
easy installationYesYesYes
accessory hookYesYesNo
weight5 lbs10 lbs5 lbs
warranty30 days30 days30 days

Summary

It is a one-piece construction which is cleverly designed to allow it to hang off of a horizontal installation strut and transfer the weight downwards to the supporting wall.

When it comes to your snowboard, it makes good sense to look after it when you’re not using it. One way to do it is with a Grassracks Bamboo Snowboard Wall Mount. Made of sustainable and strong bamboo, it holds three boards and is finished to a high-quality golden polish.

It is a one-piece construction which is cleverly designed to allow it to hang off of a horizontal installation strut and transfer the weight downwards to the supporting wall. The arms are angled upward and are fully 7 inches long which is enough for most boards.

This Grassracks snowboard wall mount also has two accessory hooks, so you can add all manner of sundry equipment like helmets and poles as needed. Tree hugger or not, you’ll love this board rack.


Pro Board Racks Hanging Snowboard Wall Mount

Pro Board Racks Hanging Snowboard Wall Mount
(rated 4.5 / 5)
Quality
Durability
Appearance
Maintenance
Value for Money
Check Price

It’s the winter, are you getting your share of mogul thrills?

Are you looking for a snowboard storage rack or a ski shelf? Perhaps you want to display or just store your favorite snowboarding equipment for the times you’re home.

There are a lot of things to think about when you’re choosing a snowboard rack.

Should you get a wooden snowboard wall mount or one made of another material? How many boards do you need to store? Do you have enough for now or will you be buying more?

When it comes to snowboard storage, it seems there’s a lot to consider.

Information

At the lower end of the verticals there are hooks for accessories such as ski poles, helmets, etc.

The Pro Board Racks Hanging Snowboard Wall Mount is designed for the long-term storage of up to five snowboards or other similar equipment; skateboards, long boards or even water skis. The rack is 46 inches from top to bottom which allows plenty of space between each board.

This wooden snowboard rack is a single piece construction made of strong Baltic birch plywood. The result is a lightweight rack which weighs only 5 pounds, but is capable of supporting 120 pounds of boards and other equipment.

The flat arms are 9 inches long and angled up from the vertical supports. The arms are not padded. All of these are features which do make a difference and it is worthwhile getting a perspective on them before you commit to a buying decision.

capacity5 boards
weight limit120 lbs
materialBaltic birch
finishPlywood
height46 in
arm length9 in
arm paddingNo padding
arm angleAngled
arm typeFlat
constructionOne-piece
wall-mountingScrews
easy installationYes
accessory hookYes
weight10 lbs
warranty30 days

There is a rustic charm about this Pro Board rack with its natural, vanilla-colored wood. Although the wood is not sealed or varnished, Pro Board sands it down thoroughly to a smooth finish, so scratching should not be an issue.

At the lower end of the verticals there are hooks for accessories such as ski poles, helmets, etc. While you will not be able to put all the equipment you have on the hooks they will certainly hold plenty and will help to organize all your gear.

Possibly the key feature of this Pro Board rack is the hanging system which gives you a lot of flexibility in how and what you hang on it, and even how you hang it.

Pros

If you’re wondering how to hang a snowboard on wall the single bar makes it a breeze even for just one person.

This Pro Board hanging rack has more going for it than just the fact that it holds five boards. Here are a few features about this snowboard storage which are worth considering as part of your buying decision. What follows are six features which really make a difference.

  • Very smart hanging mechanism: Each of the two vertical supports with arms is a one-piece unit that hooks over a horizontal support bar. The top horizontal bar is the only part of the rack which is attached to the wall. The effect is that the full weight of the rack and boards is shared across the entire rack.
  • The hanging mechanism allows you to broaden the supports too: If you wish to widen the gap between the two vertical supports, all you need to do is pull them apart to the required length. Most racks of this type of construction have a finite width rather than an adjustable one.
  • Installing the rack is a job for just one person: If you’re wondering how to hang a snowboard on wall the single bar makes it a breeze even for just one person. The real requirement is to ensure the bar is level, but otherwise, it is not difficult to put up.
  • The weight to how much it will hold is impressive: At only 5 pounds, this rack weighs very little but it will still carry 120 pounds. Boards on average are around the 10 pound mark, so even with a full complement of five boards there’s still another 50 pounds. That’s plenty of scope before you even approach the top end.
  • Accessory hooks help keep all related equipment together: While you can’t keep absolutely everything on the rack, you will be able to keep some equipment with the boards. It will save you time when next season comes around. You’ll be on the pipe before everyone else is ready.
  • Holds a great deal more than snowboards: With 9 inch arms angled upwards and the ability to easily adjust the width, you can use the rack to hold fat powder skis, shortboard skateboards, and longboards too. If you’re looking to hold more than just snowboards and are looking for efficient storage rather than display, this rack will help.

Cons

Are there any negatives which offset the positives? All products have something about them which detract from the pluses, including this Pro Board snowboard wall mount. Here are a few minor points to consider.

  • The arms are made of unfinished, unpadded wood: While the birch plywood is lightweight and appropriately strong, the wood is somewhat unfinished and so those who are particularly concerned about putting their board on a rough surface should consider the implications.
  • Because of the flexibility offered, the rack can look unbalanced: This is not really an issue, but you put up the batten, and hang the rack from it. It is possible it will hang unsymmetrically depending on the width of the verticals. It is a personal choice, and possibly academic.
  • Arms may not be long enough: Snowboards tend to be a little wider than the 9 inch arms on this rack, so there might be a slight overhang. It is not a safety issue, because the angled arms won’t let the boards fall off, but if an on overhang would bother you, make sure to measure.
 

Pro Board Racks Hanging Snowboard Wall MountPro Board Racks Hanging Snowboard Wall Mount

Grassracks Bamboo Snowboard Wall MountGrassracks Bamboo Snowboard Wall Mount

Pro Board Racks Padded Snowboard Wall MountPro Board Racks Padded Snowboard Wall Mount

PriceCheck PriceCheck PriceCheck Price
capacity5 boards3 boards4 boards
weight limit120 lbs75 lbs100 lbs
materialBaltic birchBambooPine
finishPlywoodGoldenPine
height46 in26.25 in36 in
arm length9 in7 in11 in
arm paddingNo paddingNo padding3/4-in foam
arm angleAngledAngledAngled
arm typeFlatFlatRound
constructionOne-pieceOne-pieceAssembled
wall-mountingScrewsScrewsScrews
easy installationYesYesYes
accessory hookYesYesNo
weight10 lbs5 lbs5 lbs
warranty30 days30 days30 days

Summary

Pro Board has designed this snowboard wall mount to be easily installed and its width is adjustable.

The Pro Board Racks Hanging Snowboard Wall Mount is a lightweight but very strong snowboard rack which has the capability of holding five snowboards plus additional equipment which can be attached to the accessory hooks at the bottom.

The all-important support arms are 9 inches long and angled upwards from the vertical support. They are not padded or sealed, but the birch wood used has been finely sanded to a smooth finish.

This rack is marked out by the way in which it is attached to the wall. Pro Board has designed this snowboard wall mount to be easily installed and its width is adjustable. This rack is worth a look for its cleverness and its flexibility.


Pro Board Racks Padded Snowboard Wall Mount

Pro Board Racks Padded Snowboard Wall Mount
(rated 4.3 / 5)
Quality
Durability
Appearance
Maintenance
Value for Money
Check Price

If you’re the sort of person who has more than one snowboard, and you probably are, you’ve made quite the investment in snowboarding gear.

You’ve also probably got around to thinking it’s about time to look after that expensive equipment properly, right?

When it comes to snowboard storage ideas you might be thinking about a snowboard rack for the garage or indoor ski storage.

There are lots of choices in wall-mounted snowboard racks. You could even make one yourself, but let’s face it, you won’t, and why bother when there are plenty out there.

Here’s one very good idea for a snowboard wall mount.

Information

Built of solid pine, the vertical supports have a natural finish with pre-drilled holes that are deep set so the screws don’t show after it’s mounted on the wall.

When it comes to snowboard rack systems the Pro Board Racks Padded Snowboard Wall Mount is well worth a look. This rack is designed to hold 4 boards and weighs only 5 pounds but can carry a total weight of 100 pounds, which is most probably more than the boards it can hold combined.

The rack is shipped in pieces which you construct, but it couldn’t be much simpler. The Pro Board consists of two 36 inch vertical supports which you attach to vertical wall studs. These have to be installed at the same height so be sure that you have a level handy. There are 4 pre-drilled holes down the length of each vertical support and all needed hardware is included.

Once the verticals are in place, the support arms attach into them. The arms are circular and foam covered to protect the finish on your boards. Each arm is 11 inches long and 3/4 inch thick which gives a good solid feel.

capacity4 boards
weight limit100 lbs
materialPine
finishPine
height36 in
arm length11 in
arm padding3/4-in foam
arm angleAngled
arm typeRound
constructionAssembled
wall-mountingScrews
easy installationYes
accessory hookNo
weight5 lbs
warranty30 days

The arms have a slight upward angle of 15 degrees which has a double effect of securing the board in place with no danger of slipping off, and also transferring some of the weight down to the wall itself. This makes it secure and sturdy.

Built of solid pine, the vertical supports have a natural finish with pre-drilled holes that are deep set so the screws don’t show after it’s mounted on the wall. No sharp edges to dent a board either as they’re nicely beveled.

Well-designed and well-crafted, this rack shows off the woodworking expertise and boarding knowledge of Pro Board Racks. Founded by a snowboarder, the company has been building board storage racks for almost a decade and they clearly know their business.

Pros

The arms are big enough to hold wide boards, but there’s plenty of other things that could be stored.

There are many reasons to be impressed with this padded snowboard rack, but which are the ones which set it apart from the rest of the racks vying for your attention? Here are six reasons you should take a look.

  • Installation is so easy, all you need is a screwdriver: Ok, a screwdriver and a level. There’s no struggling with the entire structure as you’re trying to put it up and keep it level at the same time. The two vertical supports weigh about 2.5 pounds each which is easy to manage.
  • Because it is two pieces you can really have any width: Another advantage of two separate pieces is you can hang them as widely apart as you want to. This gives you great flexibility in what boards you can store. Hang them wide for long boards or closer together for short.
  • The overall feel is of a sturdy and well-built product: This is where it comes back to the idea that you’ll never make it yourself, so you want something that will be as good as or better than you’d do it. Well rest assured this makes the grade.
  • Eleven-inch wide arms offer lots of storage possibilities: The arms are big enough to hold wide boards, but there’s plenty of other things that could be stored. You’ll see reviews talking about holding skis and boards and even skate boards. Don’t let the name limit your storage imagination.
  • Attention to detail is the source of value in any product: Screw holes have been drilled so that you don’t really notice the screws once it is up and the beveled edges reduce the chances of dings. It’s not a big deal, but it shows the level of attention and generally helps to make a good, solid finished item.
  • The pine finish is attractive enough, but you can paint it: If you really wanted it to fit in with the décor of your room you could give the vertical supports a coat of paint. But the natural wood is finished well and looks good as is.

Cons

There has to be a negative or two doesn’t there? But the things which bother one person may make no difference to another. In taking a look at this rack, three things come under the con heading and are worth taking into account.

  • No additional accessory hooks: It is nice to store a helmet and gloves in the same place as the board, and official storage to do so is a plus. The design is such that you could hang things off the bottom arms if you choose, but no extra hooks are included.
  • Foam wrap could be thicker: It is good enough for the job that it does and the touch point on the board itself is relatively small. But a little extra padding wouldn’t have gone amiss. If you really wanted to, it is easy enough to add more.
  • Not adjustable: The simple design of two separate vertical supports does provide a lot of flexibility for choosing the right width, but that flexibility is over once it’s mounted. Other racks are available that have movable verticals to adjust the width after installation. Be sure to measure properly first with this one.
 

Pro Board Racks Padded Snowboard Wall MountPro Board Racks Padded Snowboard Wall Mount

Grassracks Bamboo Snowboard Wall MountGrassracks Bamboo Snowboard Wall Mount

Pro Board Racks Hanging Snowboard Wall MountPro Board Racks Hanging Snowboard Wall Mount

PriceCheck PriceCheck PriceCheck Price
capacity4 boards3 boards5 boards
weight limit100 lbs75 lbs120 lbs
materialPineBambooBaltic birch
finishPineGoldenPlywood
height36 in26.25 in46 in
arm length11 in7 in9 in
arm padding3/4-in foamNo paddingNo padding
arm angleAngledAngledAngled
arm typeRoundFlatFlat
constructionAssembledOne-pieceOne-piece
wall-mountingScrewsScrewsScrews
easy installationYesYesYes
accessory hookNoYesYes
weight5 lbs5 lbs10 lbs
warranty30 days30 days30 days

Summary

The rack is easy to assemble and the kit comes with everything needed.

If you have multiple boards getting dinged and scratched in the closet the Pro Board Racks Padded Snowboard Wall Mount might be just the thing for you.

It easily holds four boards, is solid wood and looks good, too. The rack is easy to assemble and the kit comes with everything needed. Just make sure you measure properly and get the vertical supports level.

This snowboard wall mount is a well-made, sturdy product that will hold your boards and keep them safe from inadvertent damage. And let’s agree, your boards are your babies and you really do want to show them off.


T-Rax Aluminum Snowboard Wall Mount

T-Rax Aluminum Snowboard Wall Mount
(rated 4.9 / 5)
Quality
Durability
Appearance
Maintenance
Value for Money
Check Price

Dude, you’re a six board person and you’ve got to have somewhere to store them properly.

Just think of all the cash those boards represent. It’s time to look after them properly.

You need a snowboard rack or better yet, a snowboard wall rack. Instead of throwing them in the cupboard where they can chip or get scratched, you hang them on the wall.

A snowboard wall mount is just the thing to keep them safe and handy. Plus, you get to show them off.

But best, they are right there ready for the next ride.

Information

The supports are placed to provide about 8 inches of space per board which is plenty, even if you want to keep the bindings attached.

When it comes to horizontal snowboard wall mounts the T-Rax Aluminum Snowboard Wall Mount is a good choice. There’s a load of things to consider when it comes to choosing snowboard storage, so we’ll start with the specs.

Made to hold up to six boards, it measures 40 inches, or 3′ 4″, from top to bottom which is not huge for an indoor snowboard rack, especially considering it holds so many boards. The rack itself weighs a little less than 14 pounds.

This wall mounted storage system is a sleek looking black snowboard rack constructed of military-grade aluminum. The specific type of aluminum alloy T-Rax uses is 6061 T6 which is the same type used in bicycle frames and boat docks, so you know it’s strong and won’t rust.

capacity6 boards
weight limit120 lbs
materialAlluminum
finishMetalic black
height40 in
arm lengthNot specified
arm paddingUV-rated foam
arm angleHorizontal
arm typeRound
constructionWelded
wall-mountingScrews
easy installationYes
accessory hookNo
weight14 lbs
warranty30 days

The arms (the pieces you rest the boards on) are horizontal rods that come out from the vertical supports at 90 degrees. They are circular in shape which has the advantage of minimizing the touch points, and they are padded all the way around with foam that keeps nice traction between the board and rack as well as preventing scratches.

Each support arm is 12 inches long, making it ideal for wide boards that measure 26.5cm or more. The supports are placed to provide about 8 inches of space per board which is plenty, even if you want to keep the bindings attached.

This is a wall-mounted snowboard rack so you will need to hang it properly. Be sure to attach the vertical braces to studs and close enough together so that your boards will be properly supported. This means do the measuring before you start putting it up, and use the correct tools. Stainless steel hardware (screws, etc.) is included in the package.

Pros

When you’ve spent a lot on boards, you want to keep them in tip top condition.

You may think there’s not much in the way of features to look for in a snowboard wall mount, but you’d be wrong. Snowboards are pretty special and so is the tech for storing them properly. A good rack manufacturer like T-Rax knows what it takes to protect your investment.

  • Securely holds 6 boards: This rack comfortably holds six boards and bindings. It is one of the larger capacity ones around. If you’re into riding on multiple boards or have multiple riders in your home, you’ll have plenty of space for your stuff.
  • Military-grade aluminum rack has a great sturdy feel: The feel of this T-Rax product is like a high quality bike rack or car roof rack. You have the feeling that this is a quality product that is built for the job. The black powder coating only adds to the general industrial feel.
  • Circular arms provide full support: The horizontal arms are welded to the vertical supports so there’s no concern about the weight of a board loosening the joint. The strong aluminum won’t bend under the weight of a board either.
  • Foam padding protects the board from scratches and dings: When you’ve spent a lot on boards, you want to keep them in tip top condition. Putting a layer of thick foam between the board and the rack means your board’s finish is not going to get spoiled.
  • Separate vertical supports are not connected which gives flexibility: Unlike having a finite width, you can hang each support where you want it. If you only have longboards then separate them further. It’s best to attach them to a stud, so if they don’t exist at the right width, add support.
  • Lifetime guarantee: T-Rax has a solid, 20+ year history of making quality storage racks for all types of boards. Given their admirable track record, it’s no surprise that T-Rax provides such a good guarantee. The company is located in Southern California and all their racks are 100% made in the U.S.

Cons

For any product you need to know the downsides before pulling the trigger. Here are some points to consider before you buy the T-Rax aluminum rack.

  • Each vertical is supported by just three individual screwed anchor points: You need to be sure that you can hang them at the same height on two separate studs. The horizontal arms will not be horizontal if you don’t get this right and that defeats the purpose from the very beginning.
  • No accessory hooks: Keeping all of your kit together is helpful, and to that end, small hooks at the bottom would be nice to have. There will probably be some small amount of space left on the bottom support arms to hang a helmet or other gear, but hooks would be better.
  • Horizontal arms hold the boards well, but do take up space: There’s no concern with the efficiency of the arms, but the 90 degree horizontal design does take up more space than models designed with arms that are angled up a bit.
 

T-Rax Aluminum Snowboard Wall MountT-Rax Aluminum Snowboard Wall Mount

Grassracks Bamboo Snowboard Wall MountGrassracks Bamboo Snowboard Wall Mount

Pro Board Racks Hanging Snowboard Wall MountPro Board Racks Hanging Snowboard Wall Mount

PriceCheck PriceCheck PriceCheck Price
capacity6 boards3 boards5 boards
weight limit120 lbs75 lbs120 lbs
materialAlluminumBambooBaltic birch
finishMetalic blackGoldenPlywood
height40 in26.25 in46 in
arm lengthNot specified7 in9 in
arm paddingUV-rated foamNo paddingNo padding
arm angleHorizontalAngledAngled
arm typeRoundFlatFlat
constructionWeldedOne-pieceOne-piece
wall-mountingScrewsScrewsScrews
easy installationYesYesYes
accessory hookNoYesYes
weight14 lbs5 lbs10 lbs
warranty30 days30 days30 days

Summary

For riders with multiple boards, you really can’t go wrong with this snowboard wall mount.

The T-Rax Aluminum Snowboard Wall Mount is a sturdy, modern looking rack designed to hold six snowboards with plenty of space for bindings, too. Constructed of aluminum, it’s durable and strong enough to easily support that many boards.

The rack consists of two vertical braces which you hang next to each other (at the same height – that is important). The arms come out from the vertical supports at 90 degree angles. They are round and completely covered in thick foam for the protection of the board.

For riders with multiple boards, you really can’t go wrong with this snowboard wall mount. It will keep your boards off the floor, safe from dings and scratches, plus it’s a good way to show off your collection.


Store Your Board Timber Snowboard Wall Mount

Store Your Board Timber Snowboard Wall Mount
(rated 4.4 / 5)
Quality
Durability
Appearance
Maintenance
Value for Money
Check Price

When is a snowboard storage idea more than just a storage idea?

When you’re crazy for riding and you’ve got more than one board, there’s every chance you love the look of them and want to show them off.

When it comes to indoor storage you might want to use a snowboard stand or a snowboard wall mount display.

Whatever you use, you need it to be as cool and as good looking as your boards are.

So if it’s display you’re looking for, then you want a bit more than an snowboard rack for a garage, don’t you?

Information

This is a solid oak rack which has been finished and refined with attention to detail and really wouldn’t look amiss in the den or a teenager’s bedroom.

The Store Your Board Timber Snowboard Wall Mount is more like a piece of furniture than a storage solution. StoreYourBoard has married the usefulness of a snowboard rack to furniture making and come up with a product which is as good looking as the boards it is going to support.

This is a solid oak rack which has been finished and refined with attention to detail and really wouldn’t look amiss in the den or a teenager’s bedroom. StoreYourBoard has gone into the little things that make a difference.

The edge of each arm is beveled to create a finished look and to prevent sharp edges from harming a board. The top of each arm has a line of cork embedded that protects the board without detracting from the look of the rack. It is attention to facets like this which make this wall mount different from the others around.

capacity3 boards
weight limit60 lbs
materialOak
finishCherry
height30 in
arm length14.5 in
arm paddingCork
arm angleAngled
arm typeFlat
constructionAssembled
wall-mountingScrews
easy installationYes
accessory hookNo
weight6.8 lbs
warranty30 days

Designed to hold 3 boards, the hardwood rack weighs about 6 pounds and will support a full load of 60 pounds of equipment. So even though it is solid wood, it is still not too heavy to install. The vertical supports are 30 inches long and come pre-drilled at regular intervals along the length.

The gap between the arms is about 9 inches which means there is plenty of space for boards and bindings without having to fold them. The arms are 14.5 inches long wide which is generous and enough to support any type of board. You could easily store pairs of skis on each arm set, or a wide board or even a surfboard.

In business since 2009, StoreYourBoard has grown exponentially and is now one of the leading providers of storage systems for all types of boards as well as other accessories for board sports. Their reputation is excellent which makes it easy to choose their products over others.

Pros

Hang each vertical making sure they are at exactly the same height to ensure the boards will rest safely at a true horizontal.

Different products appeal to some more than others. We all have different tastes. But there’s no denying the value and quality of this product. Here’s a few of the choice features of this StoreYourBoard snowboard wall mount.

  • High-quality craftsmanship: Not every snowboard rack is made to a furniture quality finish. It shows in the finishes of the base boards and the edging of the arms. The arms slot easily into the back boards and distribute the weight properly.
  • Built in two pieces it can be any size you need: Unlike single piece units which have to be one-size-fits-all, this rack can be set at the width that works best for your equipment. The product comes with full instructions and all the hardware needed.
  • Ships in easy to assemble pieces with clear instructions: The rack consists of two vertical base bars to which the arms are attached. Hang each vertical making sure they are at exactly the same height to ensure the boards will rest safely at a true horizontal. Install each on a wall stud.
  • Made of solid American Red Oak finished with a cherry stain: A favorite of furniture and cabinet makers, Red Oak is hard, strong and durable. It has a beautiful grain that looks even better with the rich cherry finish.
  • Generously spaced arms: StoreYourBoard designed the rack with 8.5 inches between the arms. The boards rest elegantly on the gorgeous wood with plenty of space to leave the bindings on.
  • Cork padding is superior to foam: Each arm has a line of cork running down the center. Unlike foam, cork will not harden over time and will continue to protect your equipment from scratches for as long as you use them. It is an elegant solution.

Cons

This snowboard wall mount is elegant, well-made and serves its utilitarian purpose well. But this product like all others has a few things that may not be to your taste. Check them out before making a final decision.

  • No extra holders for accessories: It might be a bit picky, but keeping your equipment together so you don’t spend precious riding time looking for your gear is nice. Having hooks built into a snowboard rack system saves time and space. It’s too bad StoreYourBoard didn’t include them in the design.
  • How much equipment do you have to store? 60 pounds is probably enough for your stuff in weight terms, but with just the three levels, there is a limit to how much gear it will hold. Plus, if you’re dedicated rider and already have 3 boards to show off, chances are you’ll be getting another.
  • Furniture look might be a bit old school: For those who love the jazzier vibe of snowboarding, this might be a bit, well, more like your parent’s snowboard rack. Back to that taste thing; for someone whose taste runs to the industrial or edgy this rack might not be the best choice. It doesn’t change the fact that it’s a solid product, though.
 

Store Your Board Timber Snowboard Wall MountStore Your Board Timber Snowboard Wall Mount

Grassracks Bamboo Snowboard Wall MountGrassracks Bamboo Snowboard Wall Mount

Pro Board Racks Hanging Snowboard Wall MountPro Board Racks Hanging Snowboard Wall Mount

PriceCheck PriceCheck PriceCheck Price
capacity3 boards3 boards5 boards
weight limit60 lbs75 lbs120 lbs
materialOakBambooBaltic birch
finishCherryGoldenPlywood
height30 in26.25 in46 in
arm length14.5 in7 in9 in
arm paddingCorkNo paddingNo padding
arm angleAngledAngledAngled
arm typeFlatFlatFlat
constructionAssembledOne-pieceOne-piece
wall-mountingScrewsScrewsScrews
easy installationYesYesYes
accessory hookNoYesYes
weight6.8 lbs5 lbs10 lbs
warranty30 days30 days30 days

Summary

Beautifully made and beautifully finished, this snowboard wall mount is the perfect choice to display your boards in the style they deserve.

The Store Your Board Timber Snowboard Wall Mount is a rack system that you might think was more about display than storage. It is made of solid American Red Oak with a high level of craftsmanship and finishing.

It stores 3 boards plus their bindings with ease. With arms which are 14.5 inches long, angled upwards you can use it for boards, skis and poles easily. Be aware, though, there is no accessory holder. Installation is easy. Just be sure you measure carefully and get the vertical supports level before you drill.

Beautifully made and beautifully finished, this snowboard wall mount is the perfect choice to display your boards in the style they deserve.

Buying Guide

Number of boards displayed

If you’re looking for a snowboard rack for the wall, take into consideration how many boards of any type you currently own, plus any you may be planning to get in the future. Singles are available, but there are models made for holding up to six at a time.

If your roommates or family members are into winter or summer board sports, you should look for a rack for multiples. Better to have a few extra slots than the frustration of not enough.

Materials used in manufacturing

Snowboard racks range from metal materials to various wood varieties. Since it can be a bit tricky to place a large amount of weight on a wall (especially drywall), lightweight metal such as aluminum is a good choice.

Wooden wall mounts are common, too. Bamboo is light and strong, but woods like birch, oak or pine are sensible choices. Although you’ll occasionally find a free standing snowboard rack, the best snowboard wall racks save space by getting boards up and out of the way.

Maximum weight of boards displayed

Pay attention to weight recommendations for any storage rack. Generally, the higher the number of boards the wall rack is intended to store, the more weight it can handle. There’s little difference between the maximum limits of metal and wooden models, but check the specifications.

Related to weight, and equally as important, is the way you attach it to the wall. Drywall demands that fasteners be attached correctly. You may need to use drywall anchors with screws to prevent damage.

Weight of the wall mount by itself

Single wall mounts are extremely light, but even the versions holding several snowboards are only going to be in the 5 to 10 pound range given the type of materials used to make them. Wall mounts holding six boards will be a bit higher in weight than the smaller versions.

Measure carefully to make sure the rack is level. Unless you’re quite experienced with hanging wall items, enlisting a second person to help hold, measure, and level the rack is the best approach.

Overall height

A wall mounted snowboard rack feels less intrusive than a snowboard floor stand since floor space is often difficult to give up. Because boards are hung only inches apart, the overall height taken up by the wall mount is minimal.

Generally, 30 to 40 inches in height is more than enough room, as long as you also have the breadth of space sufficient for the length of the boards. Only hang it in an area away from walking routes.

Length of the support arms

On average, snowboards are 9-10 inches wide, so wall mount arms at least 7-8 inches or more will display boards very nicely. Usually the arms are slanted upwards, so it’s not necessary for the arms to be as long as the width of the board.

If the arms are level or nearly level, look for greater length. Skateboard decks and longboards will fit too. Surfboards can be twice as wide so don’t count on those fitting. Measure first to check.

Padding on the arms

Foam and cork are cushioning materials sometimes used to pad the arms and provide a secure rest. But some snowboard wall mounts have no padding on the arms. This shouldn’t deter you from choosing one.

Just use reasonable caution loading or unloading your board onto the mount to avoid scratches. The finish on snowboards is tough and resilient, and probably gets far more abuse from normal use on the snow and ice than they’d ever undergo from being placed on a storage rack!

Angle of the arms

Arms will either be level or slanted upwards. Both angles work equally as well. Horizontal (level) arms with some type of padding will help to keep the board seated securely.

An upward slant has the advantage of showing off the design on the board for those who enjoy the aesthetics. With some of the latest extreme colorful snowboard skin designs, a wall mount display essentially becomes artwork and provides an enjoyable focal point in a room.

Type/shape of the arms

The individual arms on a rack are either a round or flat shape. Round arms are almost always covered all the way around with a foam covering. If you like the look of high tech or modern design, round arms may suit your taste more, since they often incorporate a sleeker appearance overall.

Flat arms ordinarily are not fully padded like the round ones, but some may have padding on the top facade to help cushion the surface of the board.

Type of construction used

Heavy duty metal or lighter wood snowboard racks? Either accommodate multiple boards up to the weight the manufacturer specifies. Some are constructed in a way that allows for easy adjustments to the span of space between supports.

When storing several types of boards or adding articles like cross-country skis with ski bindings, width adjustment is the most practical choice. Otherwise, you’ll end up removing and moving the main supports outward or inward, leaving holes in the wall to repair.

Type of finish

Perhaps minimalists are satisfied using wall mounted hooks for their snowboard and other gear, but like most, you probably want an attractive, rugged type of snowboard storage. An impressive variety of finishes from techie to trendy are available.

Metal mounts range from bare aluminum with rubberized coatings that protect the board from scratches to powder-coated paint over heavier metals. Wooden options are painted or stained in a variety of attractive finishes or only have clear gloss applied over bare wood.

Method of attaching

Good luck trying to locate a snowboard wall mount with no screws necessary. If for various reasons you’re not allowed to drill holes in the wall, you probably need to go a different route altogether and get a stand up snowboard rack.

Attaching any weight-bearing object to walls requires planning, measuring and a few additional items. Locating studs behind the walls will attach it more securely, and drywall anchors prevent possible damage that takes time to repair later.

Hooks for accessories

Accessories abound in the winter sports world, and figuring out where to store all these items so they’re conveniently close but out of the way takes organization. Accessory hooks on a snowboard wall mount help eliminate clutter.

Hooks are a convenient place to hang a ski helmet. Your ski goggles will be safer in this location than forgetting you deposited them with your ski pants in the closet. It’s best not to hang long items here that could get in the path of foot traffic.

Ease of installation

Hanging a wall mount using screws is simple and quick. The biggest challenge will be measuring and getting it level. A second opinion can be valuable, so grab a friend to help you if possible.

You’ll have an extra set of hands to hold and pass you any needed tools. Take your time and think about placement so the mount’s not in the way, but still located where you can enjoy it and easily grab what you need for your trips.

Warranty

Warranties for wall mounts tend to be short, typically 30 days. But since the most abuse it will get is likely in the process of attaching it to the wall, a month should be a sufficient window of time to detect any problems.

Don’t procrastinate on hanging it. Most warranties cover defects which you’ll be able to identify right away and get a settlement from the manufacturer. Besides, when you find the best snowboard wall mount you’re sure to begin enjoying its benefits immediately.

Grassracks Bamboo Snowboard Wall Mount
Our pick for the best snowboard wall mount is: Grassracks Bamboo Snowboard Wall Mount. This choice was made after spending 39 hours researching snowboard wall mounts.

Frequently Asked Questions

What kind of snowboard rack would work for a family of four?

Manufacturers make a range of mounts for snowboards and other winter sports equipment. Many of those items can be stored together on one wall mount to save space and cut costs. A family could place snowboards and skis with ski poles together on a rack that has four or more slots.

Skateboards and longboards can be stored on these racks too, since the shape is similar. Count up all the items and choose the size that meets your family’s needs.

Which materials are the best choice for snowboard wall mounts?

Much of this decision boils down to personal preference. If your tastes run to modern sleek appearances, check out the metallic mounts with simple clean lines. If trendy is more your style, look at bamboo or aluminum materials that show off the designs of the snowboards.

You might think metal is a sturdier choice, but the wood options are durable too. There’s more likelihood of damage to the drywall from incorrect mounting procedures than there is possible breakage of the rack itself.

Is it better to get arms that are level or slanted?

If your goal is a clear view of the decorative bottom of your snowboards because you like the artistic nature, then definitely get a wall mount with slanted arms. The bottom of each board will be in full view, especially when you’re seated in the same room.

But horizontally positioned arms, also called level arms, are just as secure for positioning boards securely. These often have a type of foam or other padding that the boards rest on to keep them situated.

Are there additional uses for a snowboard wall mount?

You could think of a wall mount system generically, as an “any type of board” mount. During the winter months, you’ll want your snowboard or boards handy and a wall mount shows them off nicely. But maybe you’d prefer to store them away completely after the snow season.

If that’s the case, you can use the same storage system to place skateboards, longboards, surfboards or even a pair of water skis if the arms are a sufficient length.

Can I store or display accessories along with my snowboard?

Yes, many wall mount models have hooks included at the bottom precisely for that purpose. It’s a safe place to keep the many smaller items that you need to pack for snowboard or ski trips.

For longer items that aren’t the right size to place on these hooks, you could add a coordinating rack next to the wall mount to hang outerwear and other gear together. When perfect winter weather beckons, you can conveniently grab everything to get out the door quickly.

Grassracks Bamboo Snowboard Wall Mount
Our pick for the best snowboard wall mount is: Grassracks Bamboo Snowboard Wall Mount. This choice was made after spending 39 hours researching snowboard wall mounts.

Sources

  1. Snowboard Design, University Of Alaska Fairbanks
  2. Physiological and Physical Profile of Snowboarding: A Preliminary Review, National Institutes of Health, Jun 20, 2018
  3. What are the health hazards of snowboarding?, US National Library of Medicine National Institutes of Health, Feb 17, 2001
  4. Snowboard, used by Shaun White, National Museum of American History
  5. Ski and Snowboard Club, University of Minnesota
  6. Snowboard, Wikipedia
  7. Snowboard season arrives as mountains turn white, The Telescope, Dec 4, 2016
  8. How to Snowboard (with Pictures), wikiHow
  9. Snowboarding injuries: trends over time and comparisons with alpine skiing injuries, US National Library of Medicine National Institutes of Health, Apr 4, 2012
  10. Snowboard Wall Mount, eBay

Pin this article now!

Click this link to Check BLACK FRIDAY Price »